5150-20
Best aligned with repetitive 1/2"–1" EMT and 1/2"–3/4" RMC branch work where repeatability, reduced manual effort and point-of-installation bending have value.
Home Milwaukee Conduit Bender
Milwaukee conduit bending
Milwaukee Conduit Bender Guide: 5150-20, Shoes & Capacity
The Milwaukee conduit-bender ecosystem now includes a cordless powered branch bender as well as conventional hand benders. The key compatibility question is which exact shoe belongs on the 5150-20 and which conduit it is documented to bend.
Current powered Milwaukee system
5150-20 → Milwaukee 49-16-series bending shoe → galvanized EMT or RMC within the shoe’s size. Milwaukee states the powered shoes are exclusive to the 5150-20.
Last technical review: August 26, 2026.
M18 FUEL Branch Conduit Bender 5150-20
Milwaukee positions the 5150-20 as a portable cordless branch conduit bender for commercial and industrial electricians. The current product page lists galvanized EMT through 1" and RMC through 3/4", AUTO-ZERO for sensing the zero point of each bend, M18 battery power and a tripod/backformer setup intended to move closer to the installation point than a traditional floor bender.
Milwaukee also publishes a runtime example of up to 110 bends on 3/4" EMT with an M18 XC5.0 battery. Treat that as a manufacturer test reference rather than a guaranteed jobsite count; conduit, bend angle, battery condition and temperature can affect real-world runtime.
Milwaukee 5150-20 shoe compatibility
| Milwaukee shoe | Documented conduit | Powered-tool compatibility | Notes |
|---|---|---|---|
| 49-16-0012 | 1/2" EMT | 5150-20 only | Tool-free removable aluminum shoe; product imagery is marked “NO STAINLESS.” |
| 49-16-0034 | 3/4" EMT / 1/2" RMC | 5150-20 only | Included with the current 5150-20 package. |
| 49-16-0001 | 1" EMT / 3/4" RMC | 5150-20 only | Included with the current 5150-20 package. |
Compatibility status: manufacturer-listed.
The exclusivity wording comes from Milwaukee’s current shoe product pages. Do not substitute a conventional Milwaukee hand-bender head or another brand’s bending shoe because the conduit size label looks equivalent.
Milwaukee EMT bender: hand-bender and powered intent are different
“Milwaukee EMT bender” can refer to the 5150-20 powered branch bender or to Milwaukee hand benders. On this site, the Milwaukee Conduit Bender Guide owns that brand intent so users do not have to choose between duplicate pages. The 5150-20 is the powered path for galvanized EMT through the published 1-inch range; conventional hand benders remain a separate workflow for smaller EMT work.
For EMT selection independent of brand, use the EMT Conduit Bender Guide.
What comes with the current 5150-20 package?
Milwaukee’s current listing shows the bare bender power unit, 49-16-0034 shoe, 49-16-0001 shoe, tripod and backformer in the box. The 1/2" EMT shoe 49-16-0012 is sold separately. Battery and charger details depend on the seller/package, so verify the exact listing rather than assuming a battery kit from the base catalog number.
5150-20 vs Milwaukee hand benders
48-22-4070 / 4071 / 4072
Lightweight shoe family for 1/2", 3/4" and 1" EMT. The larger heads also carry specific rigid/IMC markings.
48-22-4080 / 4081 / 4082
Ductile-iron versions of the same core EMT size range for users who prioritize a heavier-duty shoe over minimum carry weight.
Check current Milwaukee branch-bender listings
Verify that the listing is for the 5150-20 system and confirm whether batteries, charger and the 1/2" EMT shoe are included. Retailer bundle contents are not a substitute for the Milwaukee compatibility table above.
Where the Milwaukee branch bender stops
The 5150-20 is not a 2" floor bender. If your routine work includes 1-1/4"–2" EMT, larger rigid or PVC-coated rigid, compare a larger production system such as the Greenlee 555 series. If your work is mostly occasional 1/2"–1" EMT, a conventional hand bender may still be the simpler economic choice.
Technical sources
- Milwaukee — M18 FUEL Branch Conduit Bender 5150-20 — current capacity, package contents, AUTO-ZERO and runtime reference.
- Milwaukee — 5150-20 operator manual PN0004146 — operation and safety reference.
- Milwaukee — powered conduit-bending shoe manual PN0004642 — shoe catalog numbers, supported conduit sizes and 5150-20 compatibility.
- Milwaukee — 49-16-0012 1/2" EMT shoe.
- Milwaukee — 49-16-0034 3/4" EMT / 1/2" RMC shoe.
- Milwaukee — 49-16-0001 1" EMT / 3/4" RMC shoe.
Frequently asked questions
What conduit can the Milwaukee 5150-20 bend?
Milwaukee lists the 5150-20 for galvanized EMT through 1 inch and RMC through 3/4 inch, using the dedicated Milwaukee bending shoes for those sizes.
What shoes fit the Milwaukee M18 FUEL Branch Conduit Bender?
Milwaukee lists 49-16-0012 for 1/2 inch EMT, 49-16-0034 for 3/4 inch EMT / 1/2 inch RMC, and 49-16-0001 for 1 inch EMT / 3/4 inch RMC. Milwaukee states these shoes are exclusively compatible with the 5150-20.
Does the Milwaukee branch conduit bender bend stainless conduit?
The current Milwaukee shoe pages show a NO STAINLESS marking in the product imagery and the 5150-20 product overview specifies galvanized EMT and RMC. Treat stainless as outside the documented scope unless Milwaukee publishes a specific supported setup.
Is the Milwaukee 5150-20 the same as a Milwaukee hand conduit bender?
No. The 5150-20 is a cordless powered branch conduit bender with removable shoes, tripod and backformer. Milwaukee’s 48-22-407x and 48-22-408x products are conventional hand benders.